š Up to 70% Off Selected ItemsShop Sale
Stmicroelectronics B-STLINK-VOLT Voltage Adapter Board for Debugger/Programming
1.65V to 3.3V voltage adapter board for STLINK-V3SET board is an additional module for the STLINK-V3SET, performing voltage adaptation for STM32 microcontroller targets running below 3.3V down to 1.65 V. This module can be enclosed directly in the original STLINK-V3SET casing when used as an STM32 debugging probe (JTAG/SWD/SWV/VCP) through the STDC14 connector. It can be inserted also between the STLINK-V3SET main board (MB1441) and its baseline adapter board (MB1440) when providing access to bridge signals and other connectors. B-STLINK-VOLT is not required for STM8 targets for which voltage adaptation is performed on the baseline adapter board (MB1440) provided with the STLINKV3SET.
- Input/output level shifters for STM32 debug SWD, SWV and JTAG signals
- Input/output level shifters for VCP Virtual COM port (UART) signals
- Input/output level shifters for the bridge (SPI/UART/I2C/CAN/GPIOs) signals
- Closed casing when using the STDC14 connector (STM32 SWD, SWV and VCP)
- Compatible with the STLINK-V3SET adapter board (MB1440) for STM32 microcontrollers JTAG and bridge
- Operating temperature from 0Ā°C to 50Ā°C
Other details
| Brand | STMICROELECTRONICS |
| Part Number | B-STLINK-VOLT |
| Quantity | Each |
| Technical Data Sheet EN |  |
All product and company names are trademarksā¢ or registeredĀ® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
$15.25
Original: $50.85
-70%Stmicroelectronics B-STLINK-VOLT Voltage Adapter Board for Debugger/Programmingā
$50.85
$15.25Stmicroelectronics B-STLINK-VOLT Voltage Adapter Board for Debugger/Programming
1.65V to 3.3V voltage adapter board for STLINK-V3SET board is an additional module for the STLINK-V3SET, performing voltage adaptation for STM32 microcontroller targets running below 3.3V down to 1.65 V. This module can be enclosed directly in the original STLINK-V3SET casing when used as an STM32 debugging probe (JTAG/SWD/SWV/VCP) through the STDC14 connector. It can be inserted also between the STLINK-V3SET main board (MB1441) and its baseline adapter board (MB1440) when providing access to bridge signals and other connectors. B-STLINK-VOLT is not required for STM8 targets for which voltage adaptation is performed on the baseline adapter board (MB1440) provided with the STLINKV3SET.
- Input/output level shifters for STM32 debug SWD, SWV and JTAG signals
- Input/output level shifters for VCP Virtual COM port (UART) signals
- Input/output level shifters for the bridge (SPI/UART/I2C/CAN/GPIOs) signals
- Closed casing when using the STDC14 connector (STM32 SWD, SWV and VCP)
- Compatible with the STLINK-V3SET adapter board (MB1440) for STM32 microcontrollers JTAG and bridge
- Operating temperature from 0Ā°C to 50Ā°C
Other details
| Brand | STMICROELECTRONICS |
| Part Number | B-STLINK-VOLT |
| Quantity | Each |
| Technical Data Sheet EN | |
All product and company names are trademarksā¢ or registeredĀ® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
1.65V to 3.3V voltage adapter board for STLINK-V3SET board is an additional module for the STLINK-V3SET, performing voltage adaptation for STM32 microcontroller targets running below 3.3V down to 1.65 V. This module can be enclosed directly in the original STLINK-V3SET casing when used as an STM32 debugging probe (JTAG/SWD/SWV/VCP) through the STDC14 connector. It can be inserted also between the STLINK-V3SET main board (MB1441) and its baseline adapter board (MB1440) when providing access to bridge signals and other connectors. B-STLINK-VOLT is not required for STM8 targets for which voltage adaptation is performed on the baseline adapter board (MB1440) provided with the STLINKV3SET.
- Input/output level shifters for STM32 debug SWD, SWV and JTAG signals
- Input/output level shifters for VCP Virtual COM port (UART) signals
- Input/output level shifters for the bridge (SPI/UART/I2C/CAN/GPIOs) signals
- Closed casing when using the STDC14 connector (STM32 SWD, SWV and VCP)
- Compatible with the STLINK-V3SET adapter board (MB1440) for STM32 microcontrollers JTAG and bridge
- Operating temperature from 0Ā°C to 50Ā°C
Other details
| Brand | STMICROELECTRONICS |
| Part Number | B-STLINK-VOLT |
| Quantity | Each |
| Technical Data Sheet EN | |
All product and company names are trademarksā¢ or registeredĀ® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
