Aviom Mix320-D Personal Mixing System
Aviom Mix320-D Overview
- 1Description
- 2Aviom A320 Personal Mixer
- 3Aviom D400-Dante A-Net Distributor
- 4Aviom MT-1a Mic Stand Mount
The Mix320-D Personal Mixing System from Aviom includes six A320 personal mixers, an D400-Dante A-Net distributor, and six MT-1a mic stand mounts.
The A320 personal mixer gives performing and recording musicians simple, intuitive control over their monitor mixes. It features 16 mono or stereo mix channel buttons, individual volume controls, and easy-to-use stereo placement controls. A320 also allows you to connect headphones, ear buds, or a wireless in-ear monitoring system.
For distributing the A-Net digital data and DC power to the A320 personal mixer, the system includes the D400-Dante A-Net distributor. The D400-Dante also serves as the system's input device; it allows up to 32 channels from your Dante network to be assigned to the eight powered A-Net ports on its front panel. Stereo Link switches allow adjacent channels to be treated as a stereo pairs on the A320 personal mixer where they will appear on a single mix channel button. Additionally, the Mix320-D system also comes with six MT-1A mic stand mounts.
The A320 Personal Mixer from Aviom gives performing and recording musicians simple, intuitive control over their monitor mixes, allowing them to dial in the perfect mix themselves, without having to tell an engineer to change the mix for them.
Offering three-band master tone controls optimized for in-ear monitors, and the ability to monitor 16 mono or stereo sources with per-channel volume and stereo placement, the A320 gives musicians powerful control over their mix, while also preserving the simplicity required for use while performing.
The A320 also provides the musician a way to maintain specific mix settings consistently, night after night, and show after show. The unit includes space for eight mix presets, so you can save the perfect mixes for each tune, and recall them at will, to ensure reliable results in your monitors every time.
The Aviom D400-Dante A-Net Distributor is a 2 RU rack-mountable device designed to deliver power and audio to up to eight Aviom personal mixers such as the A360, A320, A-16II, and A-16R.
The D400-Dante includes eight A-Net outputs designed for use with Aviom personal mixers. These eight outputs feature isolated (floating ground) DC power for providing remote power via Cat-5e to Aviom personal mixers. Additionally, it includes an unpowered A-Net Out, which can be used to connect additional A-Net Distributors, output modules, or other compatible devices.
The D400-Dante A-Net Distributor adds connectivity for a Dante digital audio network, allowing up to 32 channels to be sent directly from a Dante audio network to A320 and A360 personal mixers. Any 32 Dante channels may be selected from the Dante network using the Dante Controller software.
The D400-Dante is powered by an internal power supply, with a detachable power cord and IEC power inlet on the rear panel. The rear panel features a voltage selection switch that allows you to set the unit for 115 or 230 VAC operation. All network connections on the D400-Dante use RJ45 connectors.
The MT-1a Mic Stand Mount from Aviom attaches to any standard mic stand to support the Aviom A360, A320, or A-16II Personal Mixer, or the A-16CS Control Surface. It attaches to the bottom of these products with three included screws and mounts on a mic stand with two supplied ring nuts.
The MT-1a can also be used with the Aviom EB-1 Extension Bracket, sold separately, to mount on the side of a mic stand instead of on top of it. The EB-1 is a right-angle bracket that secures along the shaft of a mic stand offset to the side, and the MT-1a then attaches on top of it with the same ring nuts.
In the Box
- Aviom A320 Personal Mixer
- Aviom D400-Dante A-Net Distributor
- Aviom MT-1a Mic Stand Mount
- Set of Three Screws
- Set of Two Threaded Ring Nuts
Not in the Box
- Essential Batteries & Power (Not Included)
- Description
- Aviom A320 Personal Mixer
- Aviom D400-Dante A-Net Distributor
- Aviom MT-1a Mic Stand Mount
Aviom A320 Personal Mixer Specs
| Audio Output | 1/4" TRS stereo, headphone or line level |
| Output Connector | Tip: Audio Left Ring: Audio Right Sleeve: Ground |
| Network | A-Net I/O: 1x A-Net In, RJ45 connector; supports Pro16 and Pro16e
Pro16e A-Net: Use Cat-5e (or better) cable, maximum 400 ft (122 m) between devices, supports power Over A-Net Cat-5 Cable: Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits |
| D/A Conversion | 44.1 / 48 kHz, 24-bit |
| Stereo Linking | Stereo Link, per channel pair;
Set at the input module; Variable pan per mono channel or pan/spread per stereo channel pair
|
| Headphone Output | 275 mW per side into 50 ohms (both sides driven) |
| Output Impedance | 5 ohm |
| Frequency Response | 3 Hz - 22 kHz +0.2 dB/-3 dB at 50 Ohms |
| THD + N | < 0.003% |
| Output Voltage | 24 VDC, 0.5 amp; transmitted over Cat-5e cable |
| Signal to Noise Ratio | -106 dB (measured with zero data into all channels) |
| Latency | 0.880 msec (measured from analog input to analog output) |
| Power | 24 VDC, 0.5 amp; Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor |
| Dimensions | 10.26 x 6.14 x 1.91" (260.60 x 155.95 x 48.51 mm) |
| Weight | 1.3 lb (0.59 kg) |
| Package Weight | 2.015 lb |
| Box Dimensions (LxWxH) | 14.65 x 9.1 x 5.5" |
Aviom D400-Dante A-Net Distributor Specs
| A-Net Input/Output | Out: 1 x Pro16e A-Net; RJ45 Connector, Unpowered Out to Personal Mixers: 8 x RJ45 Connectors, Powered |
| Dante Interface | 32 Channels (44.1/48 kHz) |
| Stereo Linking | 2 x 8-Position DIP Switch Blocks (1-16, 17-32) |
| Connectors | 1 x RJ45 for Primary I/O 1 x RJ45 for Secondary I/O |
| LEDs | Red: Power On Green: Network Sync Dante LEDs: Green: Network Activity Yellow: 1 GB Active |
| Power Supply | Internal, IEC Connector |
| Input Voltage | 115 or 230 VAC (with Selector Switch), both +15/-22% at 220 W Maximum; 50 to 60 Hz |
| Output Voltage | For Personal Mixers: 24 VDC, 0.5 A Transmitted over the Cat-5e Cable |
| AC Fuses | 115 V Range: T2.5AL/250V 230 V Range: T1.25AL/250V |
| Rack Units | 2 RU |
| Dimensions | 19 x 7.4 x 3.5" / 48.3 x 18.8 x 8.9 cm |
| Weight | 12 lb / 5.4 kg |
| Package Weight | 8.4 lb |
| Box Dimensions (LxWxH) | 21.7 x 12 x 7.7" |
Aviom MT-1a Mic Stand Mount Specs
| Dimensions | 6.3" front width x 4.5" rear width x 3.0" height (16.0 x 11.5 x 7.5 cm) |
| Package Weight | 0.84 lb |
| Box Dimensions (LxWxH) | 7.25 x 5.25 x 3" |
Aviom Mix320-D Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Original: $8,079.37
-70%$8,079.37
$2,423.81Aviom Mix320-D Personal Mixing System
Aviom Mix320-D Overview
- 1Description
- 2Aviom A320 Personal Mixer
- 3Aviom D400-Dante A-Net Distributor
- 4Aviom MT-1a Mic Stand Mount
The Mix320-D Personal Mixing System from Aviom includes six A320 personal mixers, an D400-Dante A-Net distributor, and six MT-1a mic stand mounts.
The A320 personal mixer gives performing and recording musicians simple, intuitive control over their monitor mixes. It features 16 mono or stereo mix channel buttons, individual volume controls, and easy-to-use stereo placement controls. A320 also allows you to connect headphones, ear buds, or a wireless in-ear monitoring system.
For distributing the A-Net digital data and DC power to the A320 personal mixer, the system includes the D400-Dante A-Net distributor. The D400-Dante also serves as the system's input device; it allows up to 32 channels from your Dante network to be assigned to the eight powered A-Net ports on its front panel. Stereo Link switches allow adjacent channels to be treated as a stereo pairs on the A320 personal mixer where they will appear on a single mix channel button. Additionally, the Mix320-D system also comes with six MT-1A mic stand mounts.
The A320 Personal Mixer from Aviom gives performing and recording musicians simple, intuitive control over their monitor mixes, allowing them to dial in the perfect mix themselves, without having to tell an engineer to change the mix for them.
Offering three-band master tone controls optimized for in-ear monitors, and the ability to monitor 16 mono or stereo sources with per-channel volume and stereo placement, the A320 gives musicians powerful control over their mix, while also preserving the simplicity required for use while performing.
The A320 also provides the musician a way to maintain specific mix settings consistently, night after night, and show after show. The unit includes space for eight mix presets, so you can save the perfect mixes for each tune, and recall them at will, to ensure reliable results in your monitors every time.
The Aviom D400-Dante A-Net Distributor is a 2 RU rack-mountable device designed to deliver power and audio to up to eight Aviom personal mixers such as the A360, A320, A-16II, and A-16R.
The D400-Dante includes eight A-Net outputs designed for use with Aviom personal mixers. These eight outputs feature isolated (floating ground) DC power for providing remote power via Cat-5e to Aviom personal mixers. Additionally, it includes an unpowered A-Net Out, which can be used to connect additional A-Net Distributors, output modules, or other compatible devices.
The D400-Dante A-Net Distributor adds connectivity for a Dante digital audio network, allowing up to 32 channels to be sent directly from a Dante audio network to A320 and A360 personal mixers. Any 32 Dante channels may be selected from the Dante network using the Dante Controller software.
The D400-Dante is powered by an internal power supply, with a detachable power cord and IEC power inlet on the rear panel. The rear panel features a voltage selection switch that allows you to set the unit for 115 or 230 VAC operation. All network connections on the D400-Dante use RJ45 connectors.
The MT-1a Mic Stand Mount from Aviom attaches to any standard mic stand to support the Aviom A360, A320, or A-16II Personal Mixer, or the A-16CS Control Surface. It attaches to the bottom of these products with three included screws and mounts on a mic stand with two supplied ring nuts.
The MT-1a can also be used with the Aviom EB-1 Extension Bracket, sold separately, to mount on the side of a mic stand instead of on top of it. The EB-1 is a right-angle bracket that secures along the shaft of a mic stand offset to the side, and the MT-1a then attaches on top of it with the same ring nuts.
In the Box
- Aviom A320 Personal Mixer
- Aviom D400-Dante A-Net Distributor
- Aviom MT-1a Mic Stand Mount
- Set of Three Screws
- Set of Two Threaded Ring Nuts
Not in the Box
- Essential Batteries & Power (Not Included)
- Description
- Aviom A320 Personal Mixer
- Aviom D400-Dante A-Net Distributor
- Aviom MT-1a Mic Stand Mount
Aviom A320 Personal Mixer Specs
| Audio Output | 1/4" TRS stereo, headphone or line level |
| Output Connector | Tip: Audio Left Ring: Audio Right Sleeve: Ground |
| Network | A-Net I/O: 1x A-Net In, RJ45 connector; supports Pro16 and Pro16e
Pro16e A-Net: Use Cat-5e (or better) cable, maximum 400 ft (122 m) between devices, supports power Over A-Net Cat-5 Cable: Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits |
| D/A Conversion | 44.1 / 48 kHz, 24-bit |
| Stereo Linking | Stereo Link, per channel pair;
Set at the input module; Variable pan per mono channel or pan/spread per stereo channel pair
|
| Headphone Output | 275 mW per side into 50 ohms (both sides driven) |
| Output Impedance | 5 ohm |
| Frequency Response | 3 Hz - 22 kHz +0.2 dB/-3 dB at 50 Ohms |
| THD + N | < 0.003% |
| Output Voltage | 24 VDC, 0.5 amp; transmitted over Cat-5e cable |
| Signal to Noise Ratio | -106 dB (measured with zero data into all channels) |
| Latency | 0.880 msec (measured from analog input to analog output) |
| Power | 24 VDC, 0.5 amp; Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor |
| Dimensions | 10.26 x 6.14 x 1.91" (260.60 x 155.95 x 48.51 mm) |
| Weight | 1.3 lb (0.59 kg) |
| Package Weight | 2.015 lb |
| Box Dimensions (LxWxH) | 14.65 x 9.1 x 5.5" |
Aviom D400-Dante A-Net Distributor Specs
| A-Net Input/Output | Out: 1 x Pro16e A-Net; RJ45 Connector, Unpowered Out to Personal Mixers: 8 x RJ45 Connectors, Powered |
| Dante Interface | 32 Channels (44.1/48 kHz) |
| Stereo Linking | 2 x 8-Position DIP Switch Blocks (1-16, 17-32) |
| Connectors | 1 x RJ45 for Primary I/O 1 x RJ45 for Secondary I/O |
| LEDs | Red: Power On Green: Network Sync Dante LEDs: Green: Network Activity Yellow: 1 GB Active |
| Power Supply | Internal, IEC Connector |
| Input Voltage | 115 or 230 VAC (with Selector Switch), both +15/-22% at 220 W Maximum; 50 to 60 Hz |
| Output Voltage | For Personal Mixers: 24 VDC, 0.5 A Transmitted over the Cat-5e Cable |
| AC Fuses | 115 V Range: T2.5AL/250V 230 V Range: T1.25AL/250V |
| Rack Units | 2 RU |
| Dimensions | 19 x 7.4 x 3.5" / 48.3 x 18.8 x 8.9 cm |
| Weight | 12 lb / 5.4 kg |
| Package Weight | 8.4 lb |
| Box Dimensions (LxWxH) | 21.7 x 12 x 7.7" |
Aviom MT-1a Mic Stand Mount Specs
| Dimensions | 6.3" front width x 4.5" rear width x 3.0" height (16.0 x 11.5 x 7.5 cm) |
| Package Weight | 0.84 lb |
| Box Dimensions (LxWxH) | 7.25 x 5.25 x 3" |
Aviom Mix320-D Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Aviom Mix320-D Overview
- 1Description
- 2Aviom A320 Personal Mixer
- 3Aviom D400-Dante A-Net Distributor
- 4Aviom MT-1a Mic Stand Mount
The Mix320-D Personal Mixing System from Aviom includes six A320 personal mixers, an D400-Dante A-Net distributor, and six MT-1a mic stand mounts.
The A320 personal mixer gives performing and recording musicians simple, intuitive control over their monitor mixes. It features 16 mono or stereo mix channel buttons, individual volume controls, and easy-to-use stereo placement controls. A320 also allows you to connect headphones, ear buds, or a wireless in-ear monitoring system.
For distributing the A-Net digital data and DC power to the A320 personal mixer, the system includes the D400-Dante A-Net distributor. The D400-Dante also serves as the system's input device; it allows up to 32 channels from your Dante network to be assigned to the eight powered A-Net ports on its front panel. Stereo Link switches allow adjacent channels to be treated as a stereo pairs on the A320 personal mixer where they will appear on a single mix channel button. Additionally, the Mix320-D system also comes with six MT-1A mic stand mounts.
The A320 Personal Mixer from Aviom gives performing and recording musicians simple, intuitive control over their monitor mixes, allowing them to dial in the perfect mix themselves, without having to tell an engineer to change the mix for them.
Offering three-band master tone controls optimized for in-ear monitors, and the ability to monitor 16 mono or stereo sources with per-channel volume and stereo placement, the A320 gives musicians powerful control over their mix, while also preserving the simplicity required for use while performing.
The A320 also provides the musician a way to maintain specific mix settings consistently, night after night, and show after show. The unit includes space for eight mix presets, so you can save the perfect mixes for each tune, and recall them at will, to ensure reliable results in your monitors every time.
The Aviom D400-Dante A-Net Distributor is a 2 RU rack-mountable device designed to deliver power and audio to up to eight Aviom personal mixers such as the A360, A320, A-16II, and A-16R.
The D400-Dante includes eight A-Net outputs designed for use with Aviom personal mixers. These eight outputs feature isolated (floating ground) DC power for providing remote power via Cat-5e to Aviom personal mixers. Additionally, it includes an unpowered A-Net Out, which can be used to connect additional A-Net Distributors, output modules, or other compatible devices.
The D400-Dante A-Net Distributor adds connectivity for a Dante digital audio network, allowing up to 32 channels to be sent directly from a Dante audio network to A320 and A360 personal mixers. Any 32 Dante channels may be selected from the Dante network using the Dante Controller software.
The D400-Dante is powered by an internal power supply, with a detachable power cord and IEC power inlet on the rear panel. The rear panel features a voltage selection switch that allows you to set the unit for 115 or 230 VAC operation. All network connections on the D400-Dante use RJ45 connectors.
The MT-1a Mic Stand Mount from Aviom attaches to any standard mic stand to support the Aviom A360, A320, or A-16II Personal Mixer, or the A-16CS Control Surface. It attaches to the bottom of these products with three included screws and mounts on a mic stand with two supplied ring nuts.
The MT-1a can also be used with the Aviom EB-1 Extension Bracket, sold separately, to mount on the side of a mic stand instead of on top of it. The EB-1 is a right-angle bracket that secures along the shaft of a mic stand offset to the side, and the MT-1a then attaches on top of it with the same ring nuts.
In the Box
- Aviom A320 Personal Mixer
- Aviom D400-Dante A-Net Distributor
- Aviom MT-1a Mic Stand Mount
- Set of Three Screws
- Set of Two Threaded Ring Nuts
Not in the Box
- Essential Batteries & Power (Not Included)
- Description
- Aviom A320 Personal Mixer
- Aviom D400-Dante A-Net Distributor
- Aviom MT-1a Mic Stand Mount
Aviom A320 Personal Mixer Specs
| Audio Output | 1/4" TRS stereo, headphone or line level |
| Output Connector | Tip: Audio Left Ring: Audio Right Sleeve: Ground |
| Network | A-Net I/O: 1x A-Net In, RJ45 connector; supports Pro16 and Pro16e
Pro16e A-Net: Use Cat-5e (or better) cable, maximum 400 ft (122 m) between devices, supports power Over A-Net Cat-5 Cable: Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits |
| D/A Conversion | 44.1 / 48 kHz, 24-bit |
| Stereo Linking | Stereo Link, per channel pair;
Set at the input module; Variable pan per mono channel or pan/spread per stereo channel pair
|
| Headphone Output | 275 mW per side into 50 ohms (both sides driven) |
| Output Impedance | 5 ohm |
| Frequency Response | 3 Hz - 22 kHz +0.2 dB/-3 dB at 50 Ohms |
| THD + N | < 0.003% |
| Output Voltage | 24 VDC, 0.5 amp; transmitted over Cat-5e cable |
| Signal to Noise Ratio | -106 dB (measured with zero data into all channels) |
| Latency | 0.880 msec (measured from analog input to analog output) |
| Power | 24 VDC, 0.5 amp; Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor |
| Dimensions | 10.26 x 6.14 x 1.91" (260.60 x 155.95 x 48.51 mm) |
| Weight | 1.3 lb (0.59 kg) |
| Package Weight | 2.015 lb |
| Box Dimensions (LxWxH) | 14.65 x 9.1 x 5.5" |
Aviom D400-Dante A-Net Distributor Specs
| A-Net Input/Output | Out: 1 x Pro16e A-Net; RJ45 Connector, Unpowered Out to Personal Mixers: 8 x RJ45 Connectors, Powered |
| Dante Interface | 32 Channels (44.1/48 kHz) |
| Stereo Linking | 2 x 8-Position DIP Switch Blocks (1-16, 17-32) |
| Connectors | 1 x RJ45 for Primary I/O 1 x RJ45 for Secondary I/O |
| LEDs | Red: Power On Green: Network Sync Dante LEDs: Green: Network Activity Yellow: 1 GB Active |
| Power Supply | Internal, IEC Connector |
| Input Voltage | 115 or 230 VAC (with Selector Switch), both +15/-22% at 220 W Maximum; 50 to 60 Hz |
| Output Voltage | For Personal Mixers: 24 VDC, 0.5 A Transmitted over the Cat-5e Cable |
| AC Fuses | 115 V Range: T2.5AL/250V 230 V Range: T1.25AL/250V |
| Rack Units | 2 RU |
| Dimensions | 19 x 7.4 x 3.5" / 48.3 x 18.8 x 8.9 cm |
| Weight | 12 lb / 5.4 kg |
| Package Weight | 8.4 lb |
| Box Dimensions (LxWxH) | 21.7 x 12 x 7.7" |
Aviom MT-1a Mic Stand Mount Specs
| Dimensions | 6.3" front width x 4.5" rear width x 3.0" height (16.0 x 11.5 x 7.5 cm) |
| Package Weight | 0.84 lb |
| Box Dimensions (LxWxH) | 7.25 x 5.25 x 3" |
Aviom Mix320-D Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
